Universal Wire Connector Terminal Block For Fast Wiring (10 PCS)
FEATURES:
-
Safe: No danger of loose wires or brittle tape, transparent and visible.
-
Convenient: With test holes, no need to remove the tape to measure voltage.
-
Fast: Directly plug in, plug out if wrongly connected, then reconnect again.
-
Reliable: Each contact is independent of the shrapnel, and different wire diameters are also available, which can be safely shorted.
-
PA 6.6 material, permanent temperature resistance of 105 ℃, no embrittlement.
-
It can connect up to 4 mm / 32 A / 400 V.
SPECIFICATIONS:
-
Number of Channels: 3-digit / 5-digit / 8-digit
-
Rated Voltage: 250 V
-
Rated Current: 20 A
-
Cross Section Range of Connectable Wire: 0.75-2.5 mm²
-
Available Wire Cross Section Range: 18-12 AWG
-
Color: Gray
-
Wiring Method: Plug-in
-
Wiring Direction: Front
-
Pollution Degree: 2
-
Withstands Instantaneous Peak Voltage: 4 KV
-
Insulation Material: PA
-
Flame Retardant Rating: UL94 V-0 or V-2
-
Stripping Length: 12-13 mm
-
Stripping Length Range: 0.47 in
WIRING METHOD:
-
Stripped single core and stranded wire insulation 9 - 11 mm.
-
Move the orange lever up with your thumb and open the spring.
-
Pass the wire through the spring opening.
-
When the orange pressure bar is pressed, the wire is automatically clamped.
WIRE REMOVAL METHOD:
- After pushing the orange bar up with your thumb, you can remove the wire.
NOTES:
-
Please allow slight measurement deviations due to manual measurements.
-
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed in the pictures.
PACKAGE INCLUDED:
- 10 PCS Universal Wire Connector Terminal Block